Precision flat steel, serving India's largest OEMs.
Bangalore-based coil processing service center. As an authorised JSW Steel channel partner, we source flat steel mill-direct and convert it — through slitting, cut-to-length and customer-specific blanking — into precision inputs ready for your production line.
Four product lines. One standard: quality.
The full spectrum of OEM flat-steel demand — in coils, sheets, slit coils and custom blanks, all to the desired specification.
GP Regular Spangle
Galvanised plain, minimised spangle. Roofing, panels, ducting.
GP Zero Spangle
Skin-passed, smooth premium finish. White goods, auto, solar frames.
Cold Rolled C.A.
Drawing to extra-deep & IF grades. Auto panels, appliances, furniture.
Hot Rolled P&O
Pickled & oiled, scale-free. Chassis, tube mills, laser-cut parts.
Where our supplies land.
Coil in. Customer-ready out.
Mill-direct full coils with JSW mill test certificate, despatched as received.
Tension-controlled slitting to width tolerance for roll-formers, tube mills & presses.
Flat sheets with controlled camber & squareness for cabinet & panel work.
Blanks cut to the OEM's dimensions — you plan any size, we deliver it all.
Let's put our coil on your line.
Coils · Sheets · Slit Coils · Custom Blanks — built to spec, delivered on time.
Specification at a glance.
Four core lines covering the IS-grade range OEM production demands — every coil backed by a JSW mill test certificate, batch-tracked from melt to blank, with mill capability data from JSW Steel's product range.
GP Regular Spangle — Galvanised Plain
Hot-dip galvanised plain steel with minimised spangle. The workhorse of roofing, panels and ducting — a robust zinc barrier against corrosion for long service life across exposed applications.
| IS Standard | IS 277 : 2018 |
|---|---|
| Grades | Commercial → Structural 350 |
| Thickness | 0.40 – 3.0 mm |
| Coating | Z120 – Z600 g/m² · normal spangle |
| Coating range stocked | 80 – 350 gsm |
| Width | Up to 1250 mm |
From the JSW mill- BIS-approved product — galvanised steel carrying the ISI mark to IS 277.
- Accurate coating & weight — uniform zinc coating with correct sheet weight, checked at the mill.
- Longer standard lengths — fewer joints on site, lower wastage and labour cost.
- Made on modern coating lines — clean steel processes and high-tech galvanising lines for consistent quality and better yield.
GP Zero Spangle — Skin-Passed Galvanised
Skin-passed, smooth premium finish for OEMs that need flawless surfaces — white goods, automotive components and solar frames. A zero-spangled, uniformly coated surface gives higher corrosion resistance and superior paint adhesion versus standard spangled GP.
| IS Standard | IS 277 : 2018 |
|---|---|
| Grades | Commercial → Drawing |
| Thickness | 0.50 – 3.0 mm |
| Coating | Z120 – Z275 g/m² · smooth surface |
| Coating range stocked | 120 – 600 gsm (incl. solar-class) |
| Surface | Skin-passed · zero spangle · passivated |
From the JSW mill · Galveco-class zero spangle- Lead-free & RoHS-compliant — bath chemistry without added lead, meeting non-hazardous material norms.
- Zero-spangled surface — excellent surface finish and flatness with uniform, well-adhered coating.
- Higher corrosion resistance — outperforms standard spangled galvanised in service life.
- Superior paint adhesion — the smooth substrate takes paint and powder coating better.
- Proven OEM applications at the mill — AC outdoor units, refrigerators, fully-automatic washing machines, electrical panels, elevators and HVAC systems.
CRCA — Cold Rolled Close Annealed
Drawing to extra-deep drawing and IF grades for demanding press work — auto panels, appliances and furniture. Supplied matte or bright, skin-passed and oiled. CR2 drawing grade ≈ 240 MPa yield strength.
| IS Standard | IS 513-1 : 2016 |
|---|---|
| IS Grades | CR1 (Commercial) · CR2 (Drawing — D) · CR3 (Deep Drawing — DD) · CR4 (Extra Deep Drawing — EDD) · CR5 (EDD — Stabilised IF) · IF (CR0) |
| Thickness | 0.30 – 3.0 mm |
| Finish | Matte / bright · skin-passed · oiled |
| Reference | CR2 drawing ≈ 240 MPa YS |
| Width | Up to 1540 mm |
From the JSW mill · Vijayanagar CRM- Rolled at a 4.05 MTPA cold rolling complex — one of India's most advanced CRM facilities, at Vijayanagar.
- JFE Steel (Japan) collaboration — mill technology partnership for automotive CR and coated grades.
- Grade depth — Drawing, Deep Drawing, Extra Deep Drawing, Interstitial-Free and High-Strength families.
- Automatic gauge control — thickness held by numerical-model-based control for dimensional accuracy.
- Balanced surface texture — engineered for paint keying plus smoothness for image clarity after painting.
- Faster serviceability — continuous-annealing (CAL) route shortens lead time.
HRPO — Hot Rolled Pickled & Oiled
Pickled and oiled, scale-free hot rolled steel — weld-ready and laser-ready for chassis members, tube mills and precision cut parts, in commercial through structural grades.
| IS Standard | IS 1079 : 2017 · IS 2062 : 2011 |
|---|---|
| IS Grades | IS 1079 : HR1 (Commercial) · HR2 (Drawing — D) · HR3 (DD) · HR4 (EDD) · IS 2062 : E250 / E350 structural |
| Thickness (MSC despatch) | 1.6 – 6.0 mm |
| Surface | Scale-free · weld & laser ready |
| Width | Up to 1500 mm (HR) |
From the JSW mill · Vijayanagar & Dolvi HSMs- Mill range — hot rolled up to 25.4 mm thick, 2050 mm wide, coil weight up to 36 t; strip mill rolls widths up to 2150 mm, among the widest in India.
- Line-pipe capability — API X70 grade producible up to 20 mm thickness.
- Ultra-low carbon — IF and IF-HS grades for demanding forming.
- Automotive dual-phase steels — divide-quench cooling for critical auto applications.
- Microstructure control — level-2 coiling temperature control delivers the target cooling pattern.
Galvanised grade guide — mechanical properties.
Typical values per IS 277 : 2018 grade families. Bound specification is confirmed per mill test certificate & purchase order.
| Designation | Grade | Yield Stress (MPa) | Tensile Strength (MPa) | Elongation % min (L₀=50mm) |
|---|---|---|---|---|
| GPL | Drawing (Lock Forming) | 350 max | 450 max | 25 |
| GPD | Deep Drawing | 280 max | 430 max | 27 |
| GPED | Extra Deep Drawing | 260 max | 430 max | 31 |
| GPIF | Interstitial Free (Stabilised) | 240 max | 370 max | 36 |
| GP230 | Structural Grade 230 | 230 min | 310 min | 20 |
| GP275 | Structural Grade 275 | 275 min | 380 min | 20 |
| GP350 | Structural Grade 350 | 350 min | 420 min | 13 |
| GP550 | Structural Grade 550 | 550 min | 570 min | — |
Slit-width tolerance to ±0.10 mm · cut-to-length squareness within trade norms · width to 1250 mm (CR to 1540 mm · HR to 1500 mm). Mill capability figures per JSW Steel product literature; MSC despatch range per stock tables above. Indicative values — bound specification confirmed per mill test certificate & purchase order.
Galvanised coils supplied against current JSW Steel Ltd. (Vijayanagar Works) RoHS compliance certificates — free of hexavalent chromium, lead, mercury, cadmium, PBB, PBDE and restricted phthalates within RoHS norms. Zero-spangle supply is produced lead-free at the mill. Certificates shared with despatch documentation on request.
A facility built for coils.
In-house slitting, cut-to-length and blanking at Jigani — value addition under one roof, so material arrives at your line ready, not raw.
From mother coil to line-ready input.
Slitting
Mother-coil to slit-coil across the full thickness range on our tension-controlled slitting line.
- Slit-width tolerance to ±0.10 mm
- Suited to roll-formers, tube mills & presses
- Multiple widths from a single mother coil
Cut-to-Length
Precision CTL for flat sheets and customer blanks with controlled camber and squareness.
- Squareness within trade norms
- Consistent flatness for cabinet & panel work
- Batch-gauged thickness, width & squareness
Customer-Specific Blanking
Blanks cut to the OEM's exact dimensions — reducing in-plant waste and double handling.
- Less scrap at your press shop
- Direct-to-line material flow
- Repeat-order dimensional consistency
Stock & Supply
Mother coils despatched as received with JSW mill test certificates — plus stock held against your production calendar.
- GP-RS, GP-ZS, CRCA & HRPO under one roof
- Schedule-aligned despatch, not spot-market timing
- Full melt-to-blank traceability
Equipped for full mill-coil weight.
Overhead handling to full mill-coil weight — safe movement from truck to line to despatch.
Mother-coil to slit-coil across the thickness range, tension-controlled to width tolerance.
Precision CTL for sheets and customer blanks with controlled camber & squareness.
Covered pre-engineered building storage protecting CRCA & GP surfaces from the elements.
Schedule-aligned delivery.
Stock is held and despatched to your production timelines — not spot-market timing. Coils are saddle-secured and lashed for transit, and every despatch travels with its JSW mill test certificate so incoming inspection at your end is paperwork-ready.
- DESPATCH — Coils, slit coils, sheets & blanks from Jigani, Bangalore
- DOCUMENTS — Mill TC, weighment slip & tax invoice with every delivery
- COVERAGE — Serving critical OEMs across South India
Why India's OEMs choose Meenakshi Steel.
A South-India OEM specialist since 1979 — relationships measured in decades, not orders.
Six reasons, one partner.
GP, CRCA and HRPO under one roof — the OEM's complete flat-steel demand from one partner.
Slitting, cut-to-length and blanking on site — material arrives line-ready, not raw.
Every coil carries a JSW mill test certificate — batch-tracked from melt to blank.
Blanks cut to the OEM's exact dimensions reduce in-plant waste and double-handling.
Stock held and despatched to production timelines — not spot-market timing.
A South-India OEM specialist since 1979 — relationships measured in decades, not orders.
Verified before it ships.
Every coil ships with JSW chemistry & mechanical data — melt to despatch traceable.
Triple-spot zinc check per IS 6745 — coating class confirmed both faces.
Mandrel bend test per IS 277 — zinc adhesion holds without flaking.
Thickness, width & squareness gauged on every slit and cut-to-length batch.
Authorised channel partnerMill-direct, by design — sourced from India's leading integrated steelmaker.
JSW mill test certification — full traceability, melt to blank.
Full JSW catalogue — IS 277, IS 513-1, IS 1079 — right grade per application.
80 gsm light-duty to 600 gsm solar-class — sourced direct, not redistributed.
Mill-direct landed cost with structured channel pricing — predictable for OEM contracts.
From a single trading desk to a full-scale coil service centre.
Operations begin from a single trading desk in Bangalore, supplying flat steel to local fabricators and light industry — one relationship at a time, built on reliable supply and straight dealing.
The business moves beyond general trading to serve critical OEMs — appliance, electrical and component manufacturers whose lines cannot afford to stop. Consistent quality and on-time supply build the customer base that defines us today.
Becomes an authorised JSW Steel channel partner. Mill-direct sourcing brings guaranteed origin, a JSW mill test certificate on every coil, and access to the full JSW catalogue — IS 277, IS 513-1 and IS 1079 — at structured channel pricing.
Invests in the Jigani Industrial Area facility — EOT cranes to full mill-coil weight, a tension-controlled slitting line and precision cut-to-length — bringing slitting, CTL and customer-specific blanking under one roof, so material leaves line-ready, not raw.
Stocks GP-RS, GP-ZS, CRCA & HRPO across the IS-grade range OEM lines demand — despatched as coils, sheets, slit coils and custom blanks, batch-tracked from melt to blank and aligned to production calendars across South India.
